3.5W Single Axis Pulse Generator that presented by us is a versatile as well as powerful step pulse generator. This type of device is engineered to generate direction signal result and step pulse for stepper drives. The presented product accepts input in manual or standalone mode and RS-232 serial interface / auto mode. Procured from renowned manufacturers in the industry, the 3.5W Single Axis Pulse Generator is featured with natural cooling system, voltage from 18V to 80VDC, and comes in varied models, powers, types and configurations.
|Cooling System||Natural Cooling|
SINGLE AXIS STEPPER PULSE GENERATOR WORKS IN TWO MODES:
- Serial interface (RS-232) to microcontroller or computer.
- 16 bit controller.
- Low jitter 40 KHz pulse rate with linear ramps, preventing the motor stalling at high speeds.
- Adjustable maximum motor velocity (steps/ sec) and acceleration (Steps/ sec/ sec).
- Easy to use programming codes.
- Program sequence is saved in internal memory.
- Standard step/ Dir outputs interface to stepper drives.
- Emergency input.
- Jumper configurable manual and auto mode.
- Jumper configurable four different ranges of maximum speed.
- Manual mode available with preset settable velocity and acceleration.Manual mode doesnt use serial port, can be used in start/ stop applications with switches.
Single axis pulse generator works in two modes:
- Simple start/ stop using external signals (switches/ sensor inputs) with pot settable Base frequency, Max frequency and acceleration.
- Serial command input with live pulse generation or storing sequence of command for later playback.